IZZY POWER DC to AC Car Inverter HT-E-2000-12 2000 Watt 12 Volts - Professional series
Be the first to review this product !
|
0 customer review
SKU
:
IPCI0HXX
Shipping Weight
:
9.80 kg
Warranty
:
1 Tahun
Status
:
Ready Stock
PEMESANAN HUB = WWW.DAGANGKU.COM
Available Color
:
-
Price
:
1.886.400
Additional Information :
Professional series
Overview
Smart Start Function :Maximizing Startup Performance
Dynamic DC Bus Voltage Regulation
Soft start technology. Improves Reliability
How to use it ;
Display
Dynamic DC Bus Voltage Regulation
Soft start technology. Improves Reliability
How to use it ;
- Connect the inverter cable with vehicle's batteries, then turn on the power switch, LED indicator will be light up.
- Plug an AC product into AC socket and turn it on
Specification Model No. HT-E-2000-12 | HT-E-2000-24 AC Output Voltage AC 100V
AC 120V
AC 230VOutput Power Continuous 2000W Max Output power 3600W Regulation +- 5% Output Wave Form Modified Sine Wave DC Input Voltage 9.5 ~ 16v | 19 ~ 32v Input Low Voltage Alarm Yes Input Low Voltage Protection Yes Input High Voltage Protection Yes Output short circuit protection Yes Temperature instruction Yes Battery voltage indicator Yes Output Watt indicator Yes Output Frequency 50/60Hz +-3% Efficiency > 85% No load Current Draw 0.25 A | 0.2 A Temperature Protection 55 C +- 5 C Overload Protection Yes Dimension 510 x 274 x 105 Net Weight 7.3 kg Gross Weight 9.0
Display
Overtemp Protection : LED sparkles when product temperature gets high, it would shut down automatically while temperature arrives 55±5?.
Overload Protection : Orange LED lights when inverter shut down due to overloading. Inverter would re-start twice, if failed, inverter would shut down.
Please turn inverter OFF, reduce load and turn inverter ON to reset.
Digital Display or remote control : Display under battery voltage mode and load watts (Kw unit) mode, you can select the mode as your demand.
Fault Indicator : When the below status occur, and Display shows the below words:
HVP: high voltage protection.
LVP: low voltage protection.
OLP: over load protection or short circuit protectio
Trouble Shooting :
Problem | Possible cause | Solution |
Overload output short circuit | Make sure that inverter cable connect to battery well | reset the cable |
no voltage indicator | Internal fuse blown out | change new fuse |
inverter shuts down and overload light show | overload | reduce load |
inverter shuts down and overtemp light show | Overtemperature | improve ventilation |
low battery alarm | battery volt is low | change battery |
0 komentar